3 Start-Up
3.7 Measuring system data
3.7
Measuring system data
Softkey "Ready"
Activation of data
3-60
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
Fig. 3-11
Menu display "Measuring system data HLA, incremental"
To parameterize the encoder, one of the options "Incremental" or "Absolute"
(EnDat interface)" must be selected.
The value of the associated machine data is displayed as the scale graduation.
You can return to menu display "Mounting/supply data for HLA" by selecting
softkey "Back".
You can terminate the start-up operation for this drive by selecting softkey
"Ready".
A dialog message then appears. This must be acknowledged with "Abort" or
"OK".
Fig. 3-12
Dialog message "Start-up ready"
You can return to menu display "Measuring system data for HLA" by selecting
softkey "Abort".
When you press "OK", the machine data are written to the drive. The drive
model and controller data are then calculated and the boot file saved. The pro-
gram then branches to the vertical softkey menu associated with softkey "Valve/
controller..." (see Fig. 3-5) in which the data can be checked and altered through
selection of "Change valve data".
The remaining drives can then be started up.
The entered/calculated data can be activated by an NCK power On/Reset.
Siemens AG 2000. All rights reserved
02.99