Configuring The Hmi; Update Firmware; Set The Id - ABB PSTX370 Service Manual

3.2

Configuring the HMI

This chapter describes how update firmware, set the ID
and how to reset the Softstarter to default.
3.2.1

Update Firmware

Firmware needs to be updated when changing the HMI.
Please contact your ABB sales office for information.
See Figure 1.
3.2.2

Set the ID

The ID of the Softstarter has to be changed when the
PCBA has been changed and after updating firmware.
Choose between 210...370 due to type of Softstarter.
1. Switch on the power supply (terminal 1 and 2).
1
2. Push "Menu" to reach Menu.
Use or to navigate to Parameters and then
push "Select".
2
3. Use or to navigate to Complete list
and then push "Select".
3
4. Use or to navigate to 28 Service and
then push "Select".
4
to navigate to 28.01 ID and then
5. Use or
push "Edit".
5
to set 28.01 ID to 105
6. Use ,
and then push "Save".
1
1
2
3
4
5
| Service Manual | Service PSTX210...370
1SFC13105M0201
3.2.2_3
3
19