Directories - Siemens SINUMERIK 840D Operator's Manual

4
Program operating area

4.1 Directories

4.1

Directories

4-46
When you select the Programming operating area for the first time, an
overview of the standard directories is displayed.
Within these directories you can create new files for programs
required to machine the workpiece, as well as organizing, copying,
renaming, deleting and editing existing files.
Notes
• For reasons of space the workpiece name and file name are not
always displayed in full.
• If you leave the programming level for the Programming
operating area and then call it up again afterwards you
automatically jump to the last selected directory.
Prerequisites
To execute the functions for organizing and editing part programs
described in this section, click on
• the operating area button,
Pro-
gramm • the Program softkey.
The following working window is then displayed:
Standard Directory Overview working window
To call up the contents of the individual directories, select one of the
softkeys WPD, MPF, SPF, CST, CUS or CMA.
If, for example, you select WPD, the working window Workpiece
Overview will pop up.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
4
03.04
 Siemens AG, 2004. All rights reserved.