Got Side Settings; Setting Communication Interface (Communication Settings); Communication Detail Settings - Mitsubishi Electric GOT1000 Series Connection Manual

9.4 GOT Side Settings

9.4.1 Setting communication
interface (Communication
settings)
Set the channel of the connected equipment.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: RKC
• Controller Type: RKC SR Mini HG
• I/F: Interface to be used
• Driver: RKC SR Mini HG(MODBUS)
4.
The detailed setting is displayed after Manufacturer,
Controller Type,
I/F, and Driver are set.
Make the settings according to the usage
environment.

9.4.2Communication detail settings

Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting
9 - 38
9. CONNECTION TO RKC TEMPERATURE CONTROLLER

9.4 GOT Side Settings

3.
4.
Click!
[Controller Setting] from the
9.4.2 Communication detail settings
Item Description
Set this item when change the transmission
Transmissio speed used for communication with the
n Speed connected equipment.
(Default: 9600bps)
Set this item when change the data length used
for communication with the connected
Data Bit
equipment.
(Default: 8bits)
Set this item when change the data length used
for communication with the connected
Stop Bit
equipment.
(Default: 1bit)
Specify whether or not to perform a parity
check, and how it is performed during
Parity
communication.
(Default: No)
Set the number of retries to be performed when
Retry a communication error occurs.
(Default: 0time)
Set the time period for a communication to time
Timeout
out.
Time
(Default: 3sec)
Set this item to adjust the transmission timing
Delay Time of the communication request from the GOT.
(Default: 0ms)
Select the communication format.
(Default: 1)
Format 1:
Accessible to H-PCP-J, H-PCP-A, H-PCP-B,
Format
SRZ, FB, PF, HA, MA, RMC, SRX, B400 series
Format 2:
Accessible to CB series, RB, AG, THV, SA, SB1
series
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed
on the Utility's [Communication setting] after writing
[Communication Settings] of project data.
For details on the Utility, refer to the following
manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 5times
3 to 30sec
0 to 300ms
1/2