Q6
Unable to use USB device
(Continued from the previous page)
Symptom
Although the
firmware has been
copied manually
by entering a
command, the
setting is not
reflected.
Although the
configuration
file has been
copied manually
by entering a
command, the
setting is not
reflected.
Cause
Only copying the firmware
manually by entering a
command, the setting is
not reflected in the actual
operation.
O n l y
c o p y i n g
configuration file manually
by entering a command, the
setting is not reflected in the
actual operation.
Remedy
Manually copy the firmware, and then
restart the product.
t h e
Manually copy the firmware, and then
restart the product.
FWX120 Operation Manual 179
Troubleshooting
8