Q2:Setting Failed With The "Basic Configuration Page - Yamaha fwx120 Operation Manual

Q2
Setting failed with the
"Basic configuration page"
Symptom

Unable to display
the "Basic
configuration page".
Cause

The product does not
recognize the PC. (The LAN1
lamp does not light up.)
The network setting of the PC
is inappropriate. (Other PCs
and network printers on the
LAN do not function either.)
The product malfunctions.
The IP address of the product
has been changed.
The URL of the product is
inappropriate.
LAN is not specified for the
connection path setting of the
Web browser of the PC.
Proxy server is used in the
Web browser of the PC.
Remedy
Troubleshoot according to the
explanation of "The LAN1 lamp does
not light up." (page 167).
Try again to set the LAN board and
•
LAN card settings, and restart the PC.
Reacquire the IP address.
•
Restore the product to the default state,
and retry the setting (page 185).
Access the IP address specified for
•
the product "http://(IP address of the
product)/".
Restart all PCs connected to the
•
product and the LAN. If the PCs
cannot be restarted or powered off,
connect only one PC to the product,
disconnect all other LAN cables, and
then power on the product and the PC.
Check that the IP address of the PC
•
matches with the network address
of the product, and also it does not
conflict with the IP address of another
device. If anything is wrong, change
the IP address to an appropriate one.
When the product is used for the first time,
or after it has been restored to the factory
default, access "http://192.168.100.1".
In case of the Windows version of Internet
Explorer, if the dial-up connection
is enabled in "Internet Options" -
"Connection" tab, you cannot access the
"Basic configuration page". Therefore,
select "Never dial a connection".
If the proxy setting is incorrect, the "Basic
configuration page" cannot be displayed.
Check the proxy setting.
FWX120 Operation Manual  169
Troubleshooting
8