Pioneer DDJ-SX2 Service Manual page 30

1
[3] Measurement mode
A
This controller can measure "Jog dial rotation time" and drift of knobs and faders in Measurement mode.
[How to enter Measurement mode]
Turn on the power while pressing both left SHIFT button and the DECK 3 button.
LEDs within the DECK 3 button, DECK 4 button, and left FX 1-1 ON button should be lit
and other LEDs should be unlit right after the controller launches in Measurement mode.
Note:
Even if the controller connects with a computer via USB cable, it does not communicate with the computer during
Measurement mode.
Unused LEDs should be unlit during Measurement mode.
B
[How to exit Measurement mode]
In order to exit Measurement mode, turn off the power.
C
into
Measurement mode
D
E
F
30
1
2
These LEDs are lit right after the controller launches in Measurement mode.
DDJ-SX2
2
3
3
4
4