Hardware Configuration Of The Et 200Mp Distributed I/O System With Profinet Interface Module - Siemens SIMATIC S7-1500 System Manual

3.1.2 Hardware configuration of the ET 200MP distributed I/O system with
PROFINET interface module
M aximum configuration
● The integrated system power supply of the interface module feeds 14 W into the
backplane bus. The power budget calculation determines the exact number of I/O
modules that can be operated with the interface module (without optional PS). The
operating principle is described in section Power balance calculation (Page 45).
● A maximum of three system power supplies (PS) is possible: one can be inserted to the
left of the interface module and two can be inserted to the right of the interface module.
● If you insert a system power supply (PS) to the left of the interface module, this yields a
possible maximum configuration of a total of 32 modules (up to 30 modules to the right of
the interface module). If system power supplies (PS) are needed to the right of the
interface module, they each occupy one slot.
Figure 3-2
Automation system
System Manual, 09/2016, A5E03461182-AD
Maximum configuration ET 200MP with IM 155-5 PN
Application planning
3.1 Hardware configuration
35