318] Distinctive Ringing - Samsung OfficeServ 7000 Series Programming Manual

[ 318] DISTINCTIVE RINGING

9 1 B
Specifies Ring Tone (T: RING TONE) and RING CADENCE (C: CADENCE) to identify
from other rings when a call is received from a specific extension or trunk line.
In addition, this program can specify the priorities (PRI: PRIORITY) for each extension.
This priority determines which call of waiting calls has connected first if any busy line be-
comes free when all member's lines of the called extension group are busy and several
calls are waiting. (PRI: '1' has the highest priority.)
No.
1 DGP TONE
2 SLT RING
3 PRIORITY
4 VM RBACK
C ONDITIONS
4 8 0 B
Digital phones identifies rings by using ring tone. If the 'T' of a calling party's exten-
sion/trunk line is specified as F-STN, ring is generated by Program 111 of the called
party's extension. If specified as 1-8, the incoming ring is generated as the specified
tone.
Regular phones identify rings by using ring cadence. If the 'C' of a calling party's ex-
tension/trunk line is specified as F-STN, ring is generated according to the cadence of
Program 510 depending on the type of the calling parties. If specified as 1-5, the type
of calling parties is ignored and the following ring cadence is used:
At this time, the ring cadence is specified in Program 510.
No.
0 STN RING
1 TRK RING
2 ALM RING
3 DOOR RING
4 CBK RING
Samsung Business Communications
Option
Specifies the ring tone of a digital phone (1-8).
Specifies the ring cadence of a regular phone (1-5).
This option determines which call of waiting calls has the
highest priority to be connected if a busy line becomes free
when all members' lines of the called extension group are
busy and several calls are waiting (1-9).
PRIORITY 1 has the highest priority.
Specifies the use of the coloring service by using a VMS
message according to extensions (YES/NO).
Ring Cadence (C : CADENCE)
CHAPTER 2. MMC Programming
Description
Ring Type
(Extension Ring)
(Trunk Ring)
(Alarm Ring)
(Door ring)
(Call Back Ring)
2-93