Bosch C 60 Manual page 82

C 60 Analog and Frequency Inputs
Configuring Inputs – Multipoint Adjustment
Configuring a multipoint adjustment

Example: measurement of wheel force

Physical property 'wheel force' not directly measureable

Load transfer through suspension kinematics

Physical value at sensor position defined by vehicle

Curve definition by online adjustment at vehicle

Drag the 'Multipoint Adjustment' analog signal source from the Toolbox

and drop it on the desired analog input channel in the C 60 project tree
A 'Multipoint Adjustment Wizard' opens

Motorsport
82
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Force @ sensor
Force @ wheel Force @ wheel