Bosch C 60 Manual page 18

C 60 Start-Up
C 60 Start-Up
Install the software required for C 60 operation

RaceCon – C 60 setup, configuration and calibration

WinDARAB – Measurement data analysis

Set up the online connection to the C 60

100MBit Ethernet connection to the C 60

All three Ethernet ports of C 60 internally connected by a network switch

All Ethernet ports have 'cable auto crossover' functionality

Minimum wiring loom:


Motorsport
18
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Life connector (red)
Pin 1+2+3 12V supply voltage

Pin 4+5 GND supply voltage

Pin 6 Ethernet Tx+

Pin 7 Ethernet Tx-

Pin 8 Ethernet Rx+

Pin 9 Ethernet Rx-

Pin 10 Ethernet Screen
