Bosch C 60 Manual page 122

C 60 Online Measurement
C 60 Online Measurement + Calibration
Group adjustment

Setting up the group adjustment trigger channel

To add a 'Group Adjustment Channel' to the project, drag the 'Group Adjustement Channel' element from the

toolbox and drop on the C 60
A 'Group Adjustment Channel Wizard' opens

Click 'Finish' when done

Motorsport
122
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Signal is active
high or active
low
Minimum active
time to detect
and activation
Minimum time
between two
activations