Advertisement
Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Guarantee restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact the
Consumer Care Centre in your country.
Possible cause
The shaving heads
are damaged or
worn.
Hairs or dirt
obstruct the shaving
heads.
The shaver is still
attached to the
mains. For safety
reasons, the shaver
can only be used
cordlessly.
ENGLISH
Solution
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads by
following the steps of the
extra-thorough cleaning
method (see chapter
'Cleaning and maintenance').
Clean the shaver thoroughly
before you continue shaving
(see chapter 'Cleaning and
maintenance').
Disconnect the shaver from
the mains and press the on/
off button to switch on the
shaver (see chapter
'The display', section
'Unplug for use reminder').
29
Advertisement
