Advertisement
ENGLISH
20
, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to
indicate that the shaver is fully charged. This
takes approx. 1 hour.
Note: If you press the on/off button of the SmartClean
system during the cleaning program, the program
aborts. In this case, the cleaning symbol stops flashing.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and
charging have been completed, the SmartClean
switches off automatically.
Replacing the cartridge of the SmartClean
System
- Replace the cleaning cartridge when the
replacement reminder flashes orange or when
you are no longer satisfied with the result.
1
Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2).
2
Take the empty cleaning cartridge from the
SmartClean system and pour any remaining
cleaning fluid out of the Cleaning cartridge.
You can simply pour the cleaning fluid down the sink.
3
Throw away the empty cleaning cartridge.
4
Unpack the new cleaning cartridge and pull
the seal off the cartridge.
5
Place the new cleaning cartridge in the
SmartClean system.
Advertisement
