Advertisement
ENGLISH
22
Thorough cleaning method
Make sure the appliance is switched off.
1
Pull the shaving head holder off the bottom
part of the shaving unit.
2
Turn the retaining rings anticlockwise (1)
and remove them (2).
3
Remove the shaving heads from the shaving
head holder. Each shaving head consists of
a cutter and guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
4
Clean the cutter and guard under the tap.
5
After cleaning, place the cutter back into
the guard.
Advertisement
