Mitsubishi Electric MELSEC IQ-R series Reference Manual page 88

■When no device is specified
Set the following when monitor condition without device specification is selected.
ASCII code
D 0 0 0
*
44 2A 30 30 30
H H H H H
Binary code
00 00 00 A8
00
H H H
H
SFC specification
The block No. and step No. of SFC (MELSAP3) program can be specified as a monitor condition.
Specify the following values.
Condition
Specify an SFC program.
Do not specify SFC program
■Data communication in ASCII code
Convert the numerical value to 4-digit ASCII code (hexadecimal), and send it from the upper digits.
■Data communication in binary code
Send the 2-byte numerical value
*1 For C24, the additional code may be added. (Page 35 Additional code (10H))
Ex.
For 0003H
ASCII code
0 0 0 3
30 30 30 33
H H H H
Step No.
Specify the step No., pointer (P) No., or interrupt pointer (I) No. of the sequence program.
Specify a following 4-byte value.
Condition
Specify the step No. of a sequence program
Specify pointer No.
Specify an interrupt pointer No.
Do not specify
■Data communication in ASCII code
Convert the numerical value to 8-digit ASCII code (hexadecimal), and send it from the upper digits.
■Data communication in binary code
Send the 4-byte numerical value
*1 For C24, the additional code may be added. (Page 35 Additional code (10H))
Ex.
When specifying the interrupt pointer I28 (8000001CH)
ASCII code
8 0 0 0 0
38 30 30 30 30
H H H H H
8 DEVICE ACCESS
86
8.1 Data to be Specified in Commands
0 0 0 0 0 0 0
30 30 30 30 30 30 30
H H H H H H H
00 00 00 00
00 00
H H H H H H
H
SFC pattern
0003H
0000H
*1
in order from the lower byte (L: bit 0 to 7).
Binary code
03
H
*1
in order from the lower byte (L: bit 0 to 7).
Binary code
0 1 C
30 31 43 1C
H H H H
0 0 0 0 M 0
*
30 30 30 30 4D 2A 30 30
H H H H
H H H
00
90
H H
SFC block No.
0000H to 013FH (0 to 319)
0000H
00
H
b31 b30 b29 to b0
0 0 (Step No. of the arbitrary sequence program)
0 1 (Arbitrary pointer No.)
1 0 (Arbitrary interrupt pointer No.)
00000000H
00 00 80
H H H
0 0 0 0 0 0 0
30 30 30 30 30 30
H H H H H H H
SFC step No.
0000H to 01FFH (0 to 511)
0000H