Status Icons / Led's; Keypad Tones - Bosch solution 6000 Installation Manual

Solution 6000
Installation Manual

S TAT U S I CO N S / L E D 'S
The following table lists the function of each of the ICON
symbols and LED indicators on the keypad display.
Icon Status
The keypad can be programmed to display area
icons (1 to 8) that allow users to easily identify
which areas have been turned on or off without
the need to toggle between areas (See MENU 6-1-
4).
On The area is turned All On or Part On
Off The area is turned Off
Flashing
The area has an alarm
Fast
On System power is normal
Flashing System power is missing
Flashing A fire alarm is active
Off No fire alarm
Fire alarm in memory (Turn the area
On
All On and Off to Clear).
On
Off
Flashing
On
Off
On
Off
On
Off
On
Off
Flash
On
Off
On
Red
LED
Flashing
2-6
Installing the Hardware

Meaning
The existing service or trouble con-
dition has been acknowledged.
No service or trouble conditions
exist
A service or trouble condition is
present that has not been acknowl-
edged.
The area is turned Part On.
The area is not turned Part On.
The area is turned off.
The area is turned All On or Part On
The area is turned All On or Part On
The area is turned Off
All messages have been read.
Message queue is empty
An unread message is in the queue.
Area is ready to turn on
(All On / Part On)
Not ready, Zone Open
All On
Alarm
On
Green
LED
Flashing
Red &
Green Flashing
LED
Table 5: ICON & LED Indicator Meanings
K E Y PA D TO N E S
All keypads emit several distinct tones and display text
to alert you to system events. The volume of the keypad
tones can be adjusted in MENU 6-0-7.
Type
Fire When a fire zone sounds an alarm, the keypad
Alarm will sound 3 seconds on and 2 seconds off
Tone (repeat).
When a burglary zone activates while your
Burglary
system is turned on, your keypad emits a
Alarm
continuous siren tone. It sounds for the time
Tone
set by your security company.
When a system component is not functioning
Trouble
properly, your keypad sounds 4 fast short
Tone
beeps followed by a 5 second pause (repeat).
Pressing any key on the keypad sounds one
Key Press
short beep, indicating that the key press is
Tone
accepted.
When you enter the premises through a zone
programmed for entry delay, the keypad
Entry sound a Hi/Low tone to remind you to turn off
Delay the area. If the area is not turned off before
Tone the entry delay expires, an alarm condition will
sound and a report may be sent to your alarm
company.
After you turn an area All On, the keypad will
sound 1 short beep every second. During the
Exit
last 10 seconds fast short beeps will be heard.
Delay
If you don't exit before the delay time expires
Tone
and an exit delay door is faulted, an alarm
occurs.
If you enter an incorrect value when
Error
programming, the keypad will sound a 2
Tone
second tone.
The keypad will sound a Lo/Hi tone to indicate
Menu
you have entered MENU Mode and a Hi/Lo
Mode
tone to indicate you have exited MENU mode.
The keypad sounds fast short beeps to alert
Chime
you when a zone programmed for chime is
Tone
faulted or unsealled.
Table 6: Keypad Tones
In previous versions, when a user turns an area off
i
at a keypad and a trouble condition is present, the
Note
keypad would display a trouble pop-up box, but the
RED status led may fail to turn off.
Area is off.
Area not ready to turn on
Installer programming mode is
active.
Meaning
Bosch Security Systems 07/14 BLCC610I