Attendant Console Versions; Optipoint Attendant; Figure 10-35 Optipoint 500 Standard - Standard Key Assignment (Default) - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Attendant console versions

A specially equipped optiPoint telephone can perform switching services for HiPath 3000/5000.

This optiPoint Attendant simultaneously serves as the intercept position. It is the destination for

all incoming non-DID calls and calls which the call-allocation algorithms are unable to route to

users (intercept calls). The attendant routes these calls to the correct destination.

Configuration as optiPoint Attendant is possible for the following terminals: optiPoint 500 econ-

omy/basic/standard/advance, optiPoint 410 economy/economy plus/standard/advance, opti-

Point 420 economy/economy plus/standard/advance, and optiPoint 600 office.

Standard key assignment (default) for optiPoint Attendant

Figure 10-35

optiPoint 500 standard - Standard Key Assignment (Default) for optiPoint At-

For more information, please refer to the optiPoint Attendant operating instructions (see

Section 1.6, "Information on the Intranet": Electronic Documentation on Com ESY Products).

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Number redial

Microphone on/off

Workpoint Clients

Attendant console versions

Night service

Internal Phonebook

Queued calls

Table of Contents

Hipath 3000 Hipath 3800