Attachment Instructions For Inj Pipe Fixing Plate - Mitsubishi Electric CAHV-P500YA-HPB Service Handbook

[ IX Troubleshooting ]

Attachment instructions for INJ pipe fixing plate

903@@@@
INJ pipe fixing plate
attachment
1. Hold the attachment and INJ pipe fixing plate against
the terminal box, aligning the holes with the hole on the
terminal box, and then temporarily screw in the top
screw to hold them in place.
Final tightening
3. Tighten the fixing screw at the bottom.
Finished state
Final check
Make sure that the side edge of the fixing plate and the
vertical edge of the terminal box are parallel to each other.
5. Check for proper attachment.
HWE10060
Temporary tightening
Parallel
Butyl rubber
INJ pipe fixing plate
2. Press the butyl rubber on the fixing plate against
the compressor shell.
Final tightening
4. Tighten the fixing screw at the top.
- 141 -
GB