8.27 L42/L43/L44, Line Connection Module For Active/Basic/Smart Line Modules - Siemens SINAMICS S120 Manual

X60 line current transformer
Table 8- 47
Terminal
1
2
3
4
5
6
Max. connectable cross-section: 2.5 mm²
8.27 L42/L43/L44, Line Connection Module for Active/Basic/Smart Line
Modules
Availability of options
These options are available for the following S120 Cabinet Modules:
● Line Connection Modules
Option L42, Line Connection Module for Active Line Modules
This option means that the Line Connection Module is adjusted for connection to an Active
Line Module.
If a main contactor (option L13) is required for correct functioning in the Line Connection
Module, this contactor is automatically included.
Option L43, Line Connection Module for Basic Line Modules
This option means that the Line Connection Module is adjusted for connection to a Basic
Line Module.
In this case, the Line Connection Modules are equipped with the line reactor for Basic Line
Modules. If the line reactor is not required, it can be deselected with option L22 (line reactor
not included in scope of supply).
Option L44, Line Connection Module for Smart Line Modules
This option means that the Line Connection Module is adjusted for connection to a Smart
Line Module.
If a main contactor (option L13) is required for correct functioning in the Line Connection
Module, this contactor is automatically included.
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A

8.27 L42/L43/L44, Line Connection Module for Active/Basic/Smart Line Modules

Terminal block X60
Designation
-T110: k/S1
-T110: l/S1
-T111: k/S1
-T111: l/S1
-T112: k/S1
-T112: l/S1
Technical specifications
Current transformer on phase U1/L1
Current transformer on phase V1/L2
Current transformer on phase W1/L3
Options
427