Configuring The Bargraph View; Batch Recording - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.8.4 Configuring the bargraph view

Bar
Bar graph view enable
Bar graph markers
Menu enables

7.8.5 Batch recording

Refer to Appendix E, page 173.
OI/RVG200-EN
Select On to enable the Operator to display the Bargraph view.
Select the markers to be displayed on the Bargraph:
No markers
Max and min
Alarm trips
Max, min and alarm trips
Select the menu items to be accessible from the Bargraph view.
Operator message
Alarm acknowledge
Max/min reset
Note. Menu items that are not enabled are greyed-out in the Indicator
View menu.
– Enables the Operator to activate one of 24
pre-configured messages or a user-defined
message.
– Enables the Operator to acknowledge any
alarms associated with the current group.
– Enables the Operator to reset the maximum and
minimum value markers on one or all channels
to the current value.
7 Configuration
85