Conference, 5-Party - Panasonic KX-TD500 Features Manual

General Features

Conference, 5-Party

Description
A PT user can originate a 5-party conference call which includes outside or inside parties or
both.
Conditions
• Up to two 5-party conference calls can be held at a time in the system, even if TSW
Conference Expansion card is installed on the TSW card.
• Conference call arrangement
A 5-party conference call can include both inside and outside parties in any combination.
• Conference trunk
At least three idle conference trunks are required to establish a 5-party conference call.
• Executive Busy Override
Executive Busy Override does not function to the extension engaged in the 5-party
conference call.
• CONF (Conference) button
If a CONF (Conference) button is not provided on a PT, it can be assigned to a flexible (CO,
DSS, PF) button by Station, User or System Programming.
• If the other party you called is in one of the following status.
You can terminate the current call and call a new party by pressing the FLASH button.
– the other party does not answer the call.
– the other party refuses to join a Five-party conference all.
– the other party is a Voice Mail extension.
Programming Guide References
• 2.3 Numbering Plan
– Call Park / Call Park Retrieve
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.10 Holding Features
• Call Park
1.12 Conversation Features
• Conference, 3-Party
268 Features Guide