Panasonic KX-TD816 Operating Instructions Manual page 54

1.5 During a Conversation
To talk to the new party by holding the current call
PT
While hearing the Call Waiting tone
and the CO or INTERCOM indicator
is flashing rapidly
HOLD
Press HOLD.
• The current call is placed on hold.
— If both the current call and new call are extension calls, you do not have to press the
! • The default is "OFF".
!
• When Call Waiting is enabled, a Call Waiting tone is sent to the user under the following
• Setting "Data Line Security" temporarily cancels this feature.
• You can change the desired Call Waiting tone (Tone 1 or Tone 2).
PT • If a Call Waiting tone is heard and the CO or INTERCOM indicator does not flash, this tone
SLT • If "Hold-2" or "Hold-3" is assigned in System Programming, you must dial "20" after
SLT • You cannot transfer the new call while holding the current call. If you want to do so, first
• 1.2 Proprietary Telephone Settings, "Customizing Your Telephone Functions",
• 1.3 Making Calls, "Sending a Call Waiting Tone to a Busy Extension
• 1.5 During a Conversation, "Placing a Call in System Parking Area (Call Park)"
• 1.7 Useful Features, "Data Line Security"
• 1.7 Useful Features, "External Feature Access"
• See the Installation Manual, Section 3, "Call Waiting".
1-46
Operations
Technical Manuals Online! - http://www.tech-man.com
CO INTERCOM
or
Press the flashing Talk to the
CO or INTERCOM. new caller.
INTERCOM button.
conditions.
1) When an outside call (except a doorphone call) is received, or
2) When another extension executes the "Busy Station Signaling (BSS)" feature.
indicates Call Waiting from the Central Office. In this case, see "External Feature Access".
flashing the hookswitch.
park call the original call using the Call Park feature; then hang up; then take the new call.
Call Waiting Tone Selection
(Busy Station Signaling – BSS)"
SLT
While hearing a Call Waiting tone
Flash the Dial tone Hang up.
hookswitch.
• The current call is placed on hold.
Lift the Talk to the
handset. new caller.