Transferring A Call To An Outside (Co) Line (Call Transfer - To Outside (Co) Line) - Panasonic KX-TD816 Operating Instructions Manual

1.5 During a Conversation
Transferring a Call to an Outside (CO) Line
(Call Transfer – to Outside (CO) Line)
Allows you to transfer a received call to an external party.
System Programming is required to execute this feature.
PT
During a conversation
TRANSFER
Press TRANSFER.
• The current call is placed on hold.
!
!
PT • If a CPC or reverse signal is sent to an outside (CO) line before the assigned time limit, a
PT • If a call between two external parties is established, an alarm tone is sent to both parties
PT • If you want to return to the held call, press the TRANSFER button or corresponding CO or
PT • If you want to join the conversation after transferring the call, press the corresponding CO
PT • To change the party where the call is transferred before hanging-up, press the CO button
• See the Installation Manual, Section 3, "Call Transfer – to Outside (CO) Line".
1-44
Operations
Technical Manuals Online! - http://www.tech-man.com
line access code
Confirmation tone Press a CO or enter
and dial tone a line access code
(9, 0 or 81 through 86).
call between two external parties will be disconnected.
15 seconds before the assigned time limit (default: 10 min.). "Hold Recall" is sent to the
transferring extension 50 seconds before time out.
INTERCOM button before the destination party answers.
button. A conference call is established.
whose indicator is flashing slowly to retrieve the call, then repeat the Call Transfer
procedure.
CO
phone no.
Enter the phone
number where calls
will be transferred.
Wait for Announce.
Hang up or
an answer.
press
SP-PHONE.
• The call is transferred.