Placing A Call In System Parking Area (Call Park) - Panasonic KX-TD816 Operating Instructions Manual

1.5 During a Conversation

Placing a Call in System Parking Area (Call Park)

Allows you to place a held call into a system parking area. You can release from the parked
call to perform other operations. The parked call can be retrieved by any extension user.
Up to 10 calls can be parked.
PT and SLT
During a conversation
HOLD
For a PT: Press HOLD.
For an SLT: Flash the hookswitch.
Retrieving a parked call
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
! • If a parked call is not retrieved within a pre-determined time (default: 30 seconds), ringing
!
• If a parked call is not retrieved within 30 minutes, it will be automatically disconnected.
• This feature is useful when you want to hold more than one intercom call with a PT, or
PT • During a 5-party conference, you cannot use this feature.
• 1.7 Useful Features, "Conference (5-party)"
• See the Installation Manual, Section 3, "Call Park".
Technical Manuals Online! - http://www.tech-man.com
For a PT
For an SLT
Confirmation tone
and dial tone
• If you hear a busy tone, it indicates the specified parking zone is
unavailable.
• You do not need to redial the feature number to change the parking
zone. Just enter the parking zone number while hearing the busy tone.
5 2
Dial 52.
• If there is no held call, you will hear a reorder tone.
will be heard (Hold Recall).
more than one intercom or outside call with an SLT.
2 2
parking zone no.
Dial 22. Enter a parking zone number
(0 through 9).
parking zone no.
Enter a parking zone number
(0 through 9) where the call
is parked.
Confirmation tone
and dial tone
You can talk
to the party.
Confirmation tone
and dial tone
Operations
1-41