Canon ae1 Installation Procedures Manual page 48

8) Connect the puncher unit and the host machine;
then, secure them using a stepped screw both at the
front and the rear.
9) Mount the punch lower front cover and the punch
rear cover (three screws).
10) Connect the finisher and the host machine using
an interface cable [I].
4.3
Attaching the Labels etc.
4.3.1
Attaching the Label
(Puncher Unit)
1) Open the front cover of the puncher unit, and attach
the Jam Removal label [l] of the appropriate lan-
guage where indicated. (The figure shows the Fin-
isher-AE 1 .)