Canon ae1 Installation Procedures Manual page 4

[ 8 ] Front lower extension cover
1 pc. [ 8 ] Front lower extension cover
[ 9 ] Front lower extension stay
[lo]
Caster cover
[l 11 Ground rail 1 PC. [l 11 Ground rail
[12] Screw (RS tightening; M 3 x 8 ) 2 pcs. [ 1 2 ] Screw (RS tightening; M 3 x 8 )
[13] Screw (binding; M 4 x 6 ) 6 pcs. [ 1 3 ] Screw (binding; M 4 x 6 )
[ 1 4 ] Screw (tapping; M 4 x 1 2 )
[ 1 5 ] Stepped screw (M4) 2 pcs. [ 1 5 ] Stepped screw (M4)
[ 1 6 ] Tray label
1 sheet [ 1 6 ] Tray label
[ 1 7 ] Settings label 1 sheet [17] Settings label
[18] Bookmaking label
[19] Rear foot cover
Buffer Pass Unit-E2
[I]
Buffer pass unit 1 PC.
[ 2 ]
Screw (tapping;
M 4
x
1 2 )
2 pcs.
[ 3 ] Rubber sheet 1 PC.
[ 4 ]
Blanking plate*1
1
PC.
[ 5 ] Screw (binding; M 4 x 6 ) * l
2 pcs.
1 PC.
1 PC.
1 PC.
1 PC.
5 pcs.
6 pcs.
2 pcs.
2 pcs.
1 sheet
1
sheet
1 sheet
1 PC.
*':
This part is used when only the finisher is installed. It is not used when a puncher unit is installed.