Compact Receiver (Zrx-C30) - Sony DWZ-M50 Operating Instructions Manual

Configuring the battery type
Specify the type of battery that is being used
in the transmitter so that the transmitter's
remaining battery charge can be displayed
properly on this unit. The factory default
setting is [Alkaline].
1
In the [Setup] screen, select [Advanced
Settings].
2
Select [Battery Type].
3
Select the battery type.
Alkaline: Alkaline dry cell batteries
are being used in the transmitter.
Ni-MH: Rechargeable nickel-metal
hydride batteries are being used in the
transmitter.
Lithium: Lithium batteries are being
used in the transmitter.
This completes the configuration, and
the main screen appears again.
Compact Receiver (ZRX-
C30)
Configuring the RF mode and
receiving channel
Two RF modes (channel modes), [Wide
Band] and [Narrow Band], are available on
the DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use.
RF mode Transmitting
channel
number
Wide Band 1/2/3/4/5/6
(WIDE)
Narrow a/b/c/d/e/f
Band
(NARROW)
Caution
When using multiple channels (up to six),
the two RF modes, [Wide Band] and
[Narrow Band], cannot be used
simultaneously. Select only one RF mode
during use. In addition, Wi-Fi and other
environmental interference may reduce the
actual number of channels that can be used
simultaneously.
1
Set the RF MODE (RF mode
selection) switch to WIDE or
NARROW.
2
Turn the CHANNEL (channel
selection) switch to set the receiving
channel.
Caution
If you change the channel setting, be sure to
change the channel setting on the
transmitter to the same channel. If the
receiver channel and transmitter channel
are not identical, audio will not be output.
Description
This mode
reduces any
interference
to other
wireless
equipment.
This mode
reduces any
interference
from other
wireless
equipment.
Receiver Settings 21