Sony DWZ-M50 Operating Instructions Manual page 12

Digital wireless package
Hide thumbs Also See for DWZ-M50:
Table of Contents

Advertisement

Compact receiver (receiver:
ZRX-C30)
Top/front
Left/rear
a POWER indicator
Lights when the unit is turned on. When a
square 9 V dry cell battery (6LR61) is being
used, this also indicates the remaining
battery charge.
Indicator
Lit (green)
Lit (red)
12
Parts Identification
Status
Good
Almost dead
b RF (radio frequency input)
indicator
Displays the reception status of the radio
signal.
Indicator
Status
Lit (green)
Reception good
Lit (red)
Reception poor
Off
No reception
c AUDIO indicator
Indicates the status of the audio signal.
Indicator
Status
Lit (green)
Audio input present
Lit (red)
Excessive audio
input
Off
Audio input weak or
nonexistent
d TUNER OUT connector (TS phone
type)
Connect a tuning meter or similar device
here.
Caution
The audio output from the TUNER OUT
connector will continue, even if the muting
function of the transmitter is enabled.
For details on connections, see "System
Configuration Examples" (page 27).
e MAIN OUT connector (TS phone
type)
Connect a guitar amp or bass amp here.
For details on connections, see "System
Configuration Examples" (page 27).
f CABLE TONE (cable tone
generator) switch
Turn the knob to configure the cable tone
generator. The factory default setting is
OFF.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwz-b30gb

Table of Contents