NEC D3-10i Quick Start Manual page 37

3. In the Storage Manager Client browser
window, select File from the top
toolbar, then click Initialization Wizard
from the drop-down menu.
4. At the Initialization Wizard start screen, ensure
that the prerequisite steps have been performed
as listed, and then click Next when everything is
ready for initialization.
5. At the Disk Array Selection window, select the
array to be initialized, and then click Next.
Note: To be initialized, an array must be in the
Not Initialized state. Arrays in a Suspended or
Finished state have already been initialized and
should be configured by using the steps outlined
in the Configuring Logical Disks and Pools
section on page 35.
Note: The wizard will only initialize one array at
a time. If multiple arrays are selected, the wizard
will initialize the first array and then restart the
initialization process for subsequent arrays until
all selected arrays have been initialized.
NEC D3-10i Quick Start Guide 35