Sequence Of An Automatic Programme; Changing Settings During A Cooking Programme - Miele 10 406 200 Operating And Installation Instructions

Sequence of an automatic pro-
gramme
Up until the start the function, the se-
lected temperature,
time will appear in the display.
After the start during the heating-up
phase you can follow the temperature
increasing in the display. When the re-
quired temperature is reached a tone or
a melody will sound (see "Settings -
Acoustic tones").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
Shortly before the end of the cooking
duration if you are cooking at a tem-
perature above approx. 80 °C,
will appear in the display and the
duction
door will automatically open a little.
At the end the steam generator will
switch off. A tone or melody will sound
(see "Settings - Acoustic tones").
finished will appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via .
Start at and the start
Steam re-
Prog.
Operation: Steam cooking
Changing settings during a
cooking programme
 Touch .
The following will appear in the display:
–
Temperature
– Duration
–
Ready at
– Start at
If the temperature in the oven is too
high and
Ready at
played.
Changing the temperature
 Scroll through the list until
ure is highlighted.
 Confirm with OK.
 Change the temperature.
 Confirm with OK.
The programme will restart with the new
temperature.
You can permanently reset the recom-
mended temperature to suit your per-
sonal cooking preferences. (See "Set-
tings - Recommended temperatures").
are not dis-
Start at
Temperat-
43