Function Button Setting - Sony BVM-X300 Operating Instructions Manual

Submenu Setting
[Transfer Matrix] Select the transfer matrix from the
following:


Set the following depending on the
[Color Space] setting.
When [ITU-R BT.2020] is selected:
Select [ITU-R BT.2020].
When [ITU-R BT.709] is selected:
Select [ITU-R BT.709].
When another item is selected: Select
the transfer matrix setting of the device
which outputs the signal.
Note
When [Signal Format] is set to [Auto]
or [444 XYZ 12bit] and the XYZ signal
is input, the optimum setting for the
XYZ signal is fixed.
[Input Setting Skip] Sets the skip setting when changing the
input setting by pressing the SDI 2K
button. Select [Skip]/[Not Skip] for
each input setting of [Input Setting1] to
[Input Setting4].



[Function Button Setting]

Submenu Setting
[F1] to [F7] Assigns functions to the function
buttons of the front panel and turns the
function on or off.
The [Function Button Setting] menu
can also be displayed by pressing and
holding the function button, and the
setting can be changed. Note that you
cannot move to the other menu.
About functions assigned to the function
buttons
[Mono]
Press the button to display a monochrome picture.
When the button is pressed again, the monitor switches
automatically to color mode.
26
Adjustment Using the Menus
[ITU-R BT.709]
[ITU-R BT.2020]
[Skip]: Skips.
[Not Skip]: Does not skip.
[Blue Only]
Press the button to eliminate the red and green signals.
Only the blue signal is displayed as an apparent
monochrome picture on the screen. This facilitates
observation of signal noise.
[Native Scan]
Press the button to switch between the image with the
scaling display and the image displayed directly from
pixels.
Note
When Native Scan is selected, 2K resolution signals are
displayed while enlarged horizontally and vertically with
the following proportion (repeating pixel values).
1280 × 720 signal: × 3

Others: × 2

[Audio Muting]
Press to turn off the sound from the headphone output.
To turn on the sound, press this once again or turn the
volume up adjusting [Volume] of the [User Preset
Setting] menu (page 19).
[Flicker Free]
Press the button to change the flicker free setting.
[R Off]
Press the button to turn off the R (red) signal.
[G Off]
Press the button to turn off the G (green) signal.
[B Off]
Press the button to turn off the B (blue) signal.
[User Preset1]
[User Preset2]
[User Preset3]
[User Preset4]
[User Preset5]
[User Preset XYZ]
Press the button to change the User Preset number. You
can check the setting status of the User Preset in the
[User Preset Setting] menu (page 19).
[Character Off]
Press the button to hide the menu while adjusting the
picture. When the button is pressed again, the monitor
switches to the previous display.
[Internal Signal]
Press the button to display the internal signal.
[Internal Signal Pattern]
Press the button to change the pattern of the internal
signal when the internal signal is displayed. With every
press of the button, the picture switches to [PLUGE],