Installation; Mounting The Box - Bosch VSS7901/00T & VS79015T Installation And Operational Manual

7901-79015 | Installation and Operational Manual EN | 5
The intercom box has a doorbell function. This means that a buzzer
inside the system monitor sounds when someone presses the
intercom's doorbell button. When the doorbell button is pressed the
monitor switches to the camera input the intercom box is designated
to. The intercom box then allows you and the person near the
intercom box to talk to one another.

INSTALLATION

Remark: When the system configuration is altered, the system
monitor needs to check and memorize the configuration of the
cameras and accessories connected to its inputs.
This is done automatically when the power is switched on. Use the
power switch to switch off. Operating the power save key is not
sufficient. If switching off is impracticable, use the auto install option
of the system monitor's install menu.

Mounting the box

1. Loosen the screw holding the cover and remove the cover.
2. Remove the circuit board1.
Bosch Security Systems | 2004-06