Operation - Bosch VSS7901/00T & VS79015T Installation And Operational Manual

7901-79015 | Installation and Operational Manual EN | 10

OPERATION

The button on the intercom is used as (door)bell. When pushed, the
buzzer in the monitor (system & slave) sounds. The monitor (system
& slave) switches to the camera input the intercom is designated to.
The automatic camera sequence stops. If you don't react within 3
minutes - by pushing any button - then the monitor returns to its
previous status (for example, the automatic camera sequence
continues).
The system monitor reproduces the sound received from the
intercom box (plus that of the camera the system switched to, if its
microphone is not switched off). To talk back to your visitor push
talk. The sound received by the system monitor's microphone is then
reproduced by the intercom.
Bosch Security Systems | 2004-06