Tamper Switch Active - Bosch VSS7901/00T & VS79015T Installation And Operational Manual

7901-79015 | Installation and Operational Manual
• Camera is always last in line.
Dedicated settings for Eazeo color systems:
• Switches 1, 2 & 3
• #1 Any position
• #2 OFF tamper switch active, ONoverride tamper switch
(tamper OFF)
• #3 always OFF (N last)
• Rotary switch
Any position (automatically linked to camera in line)
• PIR terminal block (Alarm/Action Box only)
Link NC to - when no PIR is used.

Tamper switch active

On the circuit board a tamper switch secures the box. When opening
the box this switch triggers an alarm on the monitor. To suppress a
continuous alarm message while servicing the system, the tamper-
switch override is set in the OFF position.
CAUTION:
Don't forget to reactivate the tamper switch by switching
the override to the TAMPER position!
Bosch Security Systems | 2004-06
EN | 9