Yamaha FJR1300AS Owner's Manual page 59

GEAR GEAR
N 1
HARD
+3
●
If the preload is adjusted repeated-
ly, the preload setting pictogram
will flash 4 times and the preload
cannot be adjusted. Wait approxi-
mately 6 minutes for the preload
adjusting function motor to cool
down, and then try adjusting the
preload again.
GEAR GEAR
N N
INSTRUMENT AND CONTROL FUNCTIONS
Damping force
Within each preload setting there are 3
damping force settings: "HARD" (hard),
"STD" (standard) and "SOFT" (soft).
When the preload setting is changed,
the damping force settings will change
accordingly. (The electronically adjust-
able suspension system will automati-
cally adjust to the damping force
settings last set for that preload set-
ting.) To further finely adjust the damp-
ing force, each damping force setting
can be set to 7 different levels.
GEAR
N
HARD
+3
1. Damping force setting
2. Damping force setting level
TIP
If the preload setting was not complet-
ed correctly:
3-44
●
The damping force setting and set-
ting level will flash 4 times and can-
not be adjusted if you try to adjust
them while the vehicle is stopped.
●
The preload setting pictogram will
flash and the damping force can-
not be adjusted if you try to adjust
it while the vehicle is moving.
Be sure that the preload has been set
correctly before adjusting the damping
force.
To adjust the damping force and damp-
ing force setting level
1. Turn the key to "ON".
2. Push the menu switch "MENU" to
switch the function display to the
damping force adjusting function.
1
2
3