Yamaha FJR1300AS Owner's Manual page 29

Push the menu switch "MENU" to
switch the display between the follow-
ing functions. The display changes
each time the switch is pushed.
●
Grip warmer adjusting function
●
Information display selection func-
tion
● Windshield adjusting function
● Damping force adjusting function
● Preload adjusting function
TIP
The preload adjusting function will ap-
pear only when the vehicle is stopped
with the engine running.
The following pages contain explana-
tion of the grip warmer, information dis-
play, and windshield functions. See
page 3-42 for an explanation of the pre-
load and damping force adjusting func-
tions.
Adjusting the grip warmer
This vehicle is equipped with grip
warmers, which can only be used when
the engine is running. There are 4 grip
warmer settings.
INSTRUMENT AND CONTROL FUNCTIONS
Setting Display
Off
Low
Middle
High
To increase the grip warmer tempera-
ture, push the " " side of the select
switch. To decrease the grip warmer
temperature, push the "
select switch.
NOTICE
● Be sure to wear gloves when us-
ing the grip warmers.
●
If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
● If the handlebar grip or throttle
grip becomes worn or damaged,
stop using the grip warmers and
replace the grips.
3-14
Selecting the information display
1 2
GEAR
N
A.TEMP
C.TEMP
TIME TRIP
0:06
1. Information display
2. Display–1
3. Display–2
" side of the
4. Display–3
There are 3 information displays. The
ECA17930
selected information display can be
switched by pushing the select switch.
The following items are shown in the in-
formation displays:
● an odometer display
● tripmeter displays
● a fuel reserve tripmeter display
●
an estimated traveling range dis-
play
●
an elapsed time display
●
an ambient temperature display
● a coolant temperature display
GEAR
3
N
TRIP-1 km
5.0
TRIP-2 km 4
7.0
ODO km
20
GEAR
N
˚C RANGE km
25 11
˚C FUEL AVG km/L
Lo 12.3
FUEL CRNT km/L
12.3
3