Yamaha FJR1300AS Owner's Manual page 23

Activating and setting the cruise
control system
1. Push the cruise control power
switch " " located on the left han-
dlebar. The cruise control system
indicator light " " will come on.
1
1. Cruise control power switch "
2. Cruise control system indicator light "
2. Push the "SET–" side of the cruise
control setting switch to activate
the cruise control system. Your
current traveling speed will be-
come the set cruising speed. The
cruise control setting indicator light
"SET" will come on.
INSTRUMENT AND CONTROL FUNCTIONS
TIP
When the shift down indicator light "
is flashing, the cruise control system
cannot be activated.
1
2
1. Cruise control setting switch "RES+/SET–"
2. Shift down indicator light "
"
3. Cruise control setting indicator light "SET"
"
Adjusting the set cruising speed
While the cruise control system is oper-
ating, push the "RES+" side of the
cruise control setting switch to increase
the set cruising speed or the "SET–"
side to decrease the set speed.
TIP
Pushing the setting switch once will
change the speed in increments of ap-
proximately 2.0 km/h (1.2 mi/h). Hold-
ing the "RES+" or "SET–" side of the
cruise control setting switch down will
"
increase or decrease the speed contin-
uously until the switch is released.
You can also manually increase your
traveling speed using the throttle. After
you have accelerated, you can set a
new cruising speed by pushing the
"SET–" side of the setting switch. If you
do not set a new cruising speed, when
you return the throttle grip, the vehicle
will decelerate to the previously set
cruising speed.
2 3
Deactivating the cruise control sys-
"
tem
Perform one of the following operations
to cancel the set cruising speed. The
"SET" indicator light will go off.
●
3-8
Turn the throttle grip past the
closed position in the deceleration
direction.
3