Toro 22321 Operator's Manual page 13

Traction Control
1. Reference bar (does not move to give you a reference point
and a fixed handle to hold while operating the traction unit)
2. Traction control (moves to control the machine)
• To move forward, move the traction control forward
(Figure 6).
• To move rearward, move the traction control
rearward (Figure 7). When reversing, look behind
for obstructions and keep your hands on the
reference bar (Figure 6).
• To turn right, rotate the traction control clockwise
(Figure 8).
Figure 5
Figure 6
Figure 7
• To turn left, rotate the traction control
counterclockwise (Figure 9).
• To stop, release the traction control (Figure 5).
Note: The farther you move the traction control in
any direction, the faster the machine will move in that
direction.
Loader Arm/Attachment Tilt Lever
To tilt the attachment forward, slowly move the lever to
the right (Figure 10).
To tilt the attachment rearward, slowly move the lever to
the left (Figure 10).
To lower the loader arms, slowly move the lever forward
(Figure 10).
To raise the loader arms, slowly move the lever rearward
(Figure 10).
You can also push the lever fully forward into a detent
position (Figure 10) to release the loader arms so that the
attachment rests on the ground. This allows attachments
such as the leveler and the hydraulic blade to follow the
contours of the ground (i.e., float) when grading.
13
G008131
Figure 8
G008132
Figure 9