Product Overview; Controls - Toro 22321 Operator's Manual

Product Overview

1. Track
2. Track adjustment chamber
3. Lift cylinder
4. Cylinder lock

Controls

Become familiar with all the controls (Figure 4) before
you start the engine and operate the traction unit.
5 6 7
3
1 4
1. Traction control
2. Loader arm/attachment tilt
lever
3. Auxiliary hydraulics lever
4. Reference bar
5. Throttle lever
6. Choke lever
Key Switch
The key switch, used to start and stop the engine, has
three positions: off, run, and start.
To start the engine, rotate the key to the start position.
Release the key when engine starts and it will move
automatically to the run position.
5. Loader arms
6. Hood
7. Auxiliary hydraulic couplers 11. Control panel
8. Tilt cylinder
8 9 10 12
G006104
2
Figure 4
7. Fuel gauge
8. Hydraulic oil temperature
light
9. Hour meter/tachometer
10. Key switch
11. Parking brake lever
12. Loader valve lock
Figure 3
9. Mount plate
10. Tie-down/lift loop
12. Rear access cover
To stop the engine, rotate the key to the off position.
Throttle Lever
11
Move the control forward to increase the engine speed
and rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke to
keep the engine running smoothly. As soon as possible,
move the choke lever all the way rearward.
Note: A warm engine requires little or no choking.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary hydraulics lever. To ensure
smooth, controlled operation, do not take both hands
off of the reference bar while operating the traction unit.
12
13. Fuel tank
14. Reverse safety plate