Configure Bandwidth - Bosch DIVAR AN 3000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
–
–
–
–
–
–
Once all fields are correctly entered, click <Network setting> to assign other network settings
– see Network settings, page 51.
When ready, click <Save> to enter values and go back to the previous menu.
See also
–
–
6.6.1

Configure bandwidth

Figure 6.10: Configure bandwidth
Bosch Security Systems
Max connection: (default is 4 remote users). The maximum number of connections is 64,
however more than 4 remote connections can cause performance limitations. Bosch
strongly advises not using more than 4 simultaneous connections. Set to 0 to disable the
network connection.
Bandwidth limit: Press <Configure> to alter the bandwidth settings – see Configure
bandwidth, page 49.
Internal port: if required, enter here the preferred internal communication port to be used
by the firmware. Default is 7892.
Preferred DNS: if required, enter here the preferred DNS server IP address.
Alternate DNS: if required, enter here an alternative DNS server address.
LAN download: Select this option to assign priority to remote downloading (exporting)
data. The download speed is 1.5x or 2.0x the normal speed (this can have a negative
effect on remote live and playback performance in web client and BVC, but will improve
the LAN download speed).
Network settings, page 51
Configure bandwidth, page 49
Operations Manual
Configuration | en 49
2015.10 | v2.3 | AM18-Q0669