Sequence; Monitor A; Monitor B - Bosch DIVAR AN 3000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
The other buttons on the bottom of the screen are used to assign and activate a set of
movements for the camera as follows:
1.
2.
3.
4.
5.
The Aux buttons are used when activating an ID for special processes stored in the camera
–
–
See also
–
7.2.3

Sequence

Setup the camera sequence and interval times in the following configuration screens:
–
–
Activate sequence on monitor A
1.
2.
3.
See also
–
–
7.2.4

Monitor A

Monitor A shows live pictures of connected cameras in full-screen or multiscreen, plus status
messages and alarm events (e.g. motion and video loss warnings). When multiple events
occur, camera pictures can also be sequenced on monitor A to follow the events.
The search/play function and all user menus are also activated on this monitor.
7.2.5

Monitor B

Monitor B displays live pictures in full-screen (multiscreen is possible if a multiple-view
sequence is enabled on Mon B). If an alarm/detect event is signaled, the camera picture with
the event can be displayed on monitor B. When multiple events occur, camera pictures can
also be sequenced on monitor B to follow the events.
Bosch Security Systems
Enter a number (from 1 to 999) in the right field (this will be the ID for the preset PTZ
movements for the camera).
Use the eight direction arrows to swivel the camera to a desired position.
Click <Set> to assign the final position to the ID.
You will be asked to save the preset (use the focus
eventually added to the PTZ activation sequence if an alarm is detected – see Detect, page
62.
If required press <Shot> to move the camera immediately to a preset ID position.
Aux On: refer to your camera manual for the Aux definition.
Aux Off: switch off the special Aux definition
Detect, page 62
For monitor A - see Sequence Mon. A, page 69
For monitor B – see Sequence Mon B, page 86
To view a sequence of live camera pictures from several cameras:
– Right-click the mouse to access the Quick menu
– Choose Sequence on
Check that a sequence of camera pictures appears,
To stop sequencing, right-click the mouse to access the Quick menu, and choose
Sequence off
Sequence Mon. A, page 69
Sequence Mon B, page 86
Operations Manual
Operating instructions | en
button to save). This preset can be
2015.10 | v2.3 | AM18-Q0669
101