Updates
4-way server blade: Replacing the lithium battery
To allow permanent saving of the system information, a lithium battery is
installed which supplies the CMOS memory of the 4-way server blade with power.
Position of the lithium battery (1) in the 4-way server blade
If the battery voltage is too low or the battery is empty, a corresponding error
message is displayed. In this case, the lithium battery must be replaced.
– Incorrect replacement of the lithium battery may cause a risk of
!
explosion. The positive pole must be on top!
– The lithium battery must be replaced with an identical battery or with
a battery type recommended by the manufacturer (CR2032).
– Do not throw lithium batteries into the trash can. Please dispose of
them in accordance with local regulations.
U41057-J21-Z146-1-76
1
March 2006
Update revision 08.2004
02
BX600
–
179
–