Panasonic KX-TDA15 Features Manual page 370

2.2 System Configuration—Software
[Programming Example]
Caller
COS 1
COS 2
COS 3
COS 4
COS 5
COS 6
:
: Block
Explanation:
1.
Assign each extension in a tenant to a certain COS number. Each tenant must have unique COS
numbers.
Tenant 1: COS 1 and COS 2
Tenant 2: COS 3 and COS 4
Tenant 3: COS 5 and COS 6
2.
Tenant-to-Tenant Call Block enables by the Internal Call Block feature.
a)
Tenant 1 (COS 1 and COS 2) can make calls to both Tenant 2 (COS 3 and COS 4) and Tenant
3 (COS 5 and COS 6) as well as Tenant 1.
b)
Tenant 2 (COS 3 and COS 4) can make calls to Tenant 1 (COS 1 and COS 2) and Tenant 2.
c)
Tenant 3 (COS 5 and COS 6) can make calls to Tenant 3 itself only.
• An incoming call distribution group must belong to one tenant because the following features are
determined on a tenant basis (→ 1.2.2.1 Incoming Call Distribution Group Features—SUMMARY):
– Music on Hold while a call is waiting in the queue
– The Time Table which determines the overflow destination.
Programming Manual References
PC Programming Manual
3.8.3 [2-2] Operator & BGM
→ PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
3.8.5 [2-4] Week Table
3.8.7 [2-5] Holiday Table
3.8.13 [2-7-3] Class of Service—Internal Call Block
3.9.4 [3-2] User Group
3.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—Tenant Number
3.10.1 [4-1-1] Wired Extension—Extension Settings—Main—User Group
3.10.10 [4-2-1] Portable Station—Extension Settings—Main—User Group
370 Feature Guide
COS 1 COS 2 COS 3
: :
Called Party
COS 4 COS 5
: : :
COS 6 ...
...
...
...
...
...
...
: :