Replacing The Hydraulic Pump-Drive Belt - Toro Z Master Professional 6000 74922 Operator's Manual

Figure 78
1. Position the belt cover
2. Slide the belt cover under
the side catches
3. Ensure that the tab is
under the metal catch
Replacing the Hydraulic
Pump-Drive Belt
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Remove the mower belt; refer to
Belt (page 51).
4. Raise the machine and support it with jack stands
(Figure 79).
1. Idler pulley
2. Clutch pulley
3. Pump-drive belt
4. Right hand
hydraulic-pump pulley
5. Use a ratchet in the square hole in the idler arm to
remove the idler spring
6. Unhook the idler spring from the frame
52
Replacing the Mower
Figure 79
5. Left hand hydraulic-pump
pulley
6. Square hole in the idler
arm
7. Idler spring
(Figure 79).
(Figure 79).