Positioning the Seat
The seat moves forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
To adjust, move the lever sideways to unlock the seat
35).
g019754
Unlatching the Seat
1. Seat latch
Figure 34
Figure 35
Figure 36
2. Seat
Changing the Seat Suspension
The seat adjusts to provide a smooth and comfortable ride.
Position the seat where you are most comfortable.
To adjust, turn the knob in front either direction to provide
the best comfort
1. Seat-suspension knob
Using the Drive-Wheel-Release
(Figure
Valves
WARNING
Hands may become entangled in the rotating drive
components below the engine deck, which could
result in serious injury.
Stop the engine, remove the key, and allow
all moving parts to stop before accessing the
drive-wheel-release valves.
WARNING
The engine and hydraulic-drive units can become
very hot. Touching a hot engine or hydraulic-drive
units can cause severe burns.
Allow the engine and hydraulic-drive units to cool
completely before accessing the drive-wheel-release
valves.
The drive-wheel-release valves are located in the back of each
hydraulic-drive unit, under the seat.
Note: Make sure the release valves are in the fully horizontal
position when operating the machine or severe damage to the
g019755
hydraulic system can occur.
1. Disengage the PTO (blade-control switch) and turn
the ignition key to the Off position, move the levers to
neutral-locked position, apply the parking brake, and
remove the key.
28
(Figure
37).
g019768
1
Figure 37