Siemens 670 V2 Operating Instructions Manual page 9

Conventions
The following text distinctions make it easier for you to read the manual:
Type of display
"File"
"File > Process"
<F1>, <Shift>+<F1>
In these operating instructions, the standard term "device" replaces the terms "Panel PC
670/870 V2," "control unit," and "computer unit." The concrete term is used only where
necessary.
Note
A reference is important information concerning the product, the handling of the product, or it
points out a certain part of the documentation to which particular attention should be paid.
Trademarks
All designations bearing the ® trademark symbol are registered trademarks of Siemens AG.
All other designations in this documentation are trademarks, whose use by third parties for
their own purposes might infringe on the rights of the owner.
HMI
SIMATIC
SIMATIC HMI
SIMATIC ProTool
SIMATIC WinCC
Panel PC 670
Panel PC 870
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
®
®
®
®
®
®
®
Area of validity
Terms which appear on the user interface, for example,
•
dialog names, tab controls, buttons, menu commands.
Required entries, e.g. limit values, tag values.
•
Path information
•
Operating sequences, e.g. menu commands, context menu
commands.
Keys and key combinations
Preface
1.1 This manual
1-3