Maintenance And Replacement Parts; Separating The Control Unit And The Computer Unit In The Central Design; Separating Panel Pc 670 V2 - Siemens 670 V2 Operating Instructions Manual

Maintenance and Service

9.2 Maintenance and replacement parts

9.2 Maintenance and replacement parts
The following replacement parts are available for the device:
Replacement part
The complete control unit
The complete computer unit
In addition for the decentralized design:
the connecting cable
2 m,
5 m,
10 m,
20 m
Set of clamps
Rubber cover for the USB port
Lithium battery
9.3

Separating the control unit and the computer unit in the central design

9.3.1

Separating Panel PC 670 V2

Area of validity
The section applies to the central design.
Introduction
The control unit is separated from the computer unit to carry out repairs or replace the
control unit, for example.
9-2
Order number:
A generally valid order number for the control unit
cannot be given because it is dependent on the control
unit and computer unit configuration at hand and their
order numbers. In this case, please contact your
Siemens branch office.
For additional information, please refer to computer
unit operating instructions.
For further information, please refer to options in the
chapter
"Description"
6XV1440-7AH20
6XV1440-7AH50
6XV1440-7AN10
6XV1440-7AN20
6FC5248-0AF06-0AA0
6FC5248-0AF05-0AA0
W79084-E1003-B1
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Panel PC 670 V2/870 V2, Control unit