Set Zone Times Setup - Toro 53805 Installation & Programming Manual

SET ZONE TIMES Setup

The SET ZONE TIMES setup tells the controller how much time each station will be
activated (runtime).
Step 1 – Place the function dial to the SET ZONE TIMES
Step 2 – Press
Step 3 – Press
Step 4 – Press
be active. Each station can have a runtime of one minute and up to six hours. For
unused stations, adjust the runtime to
Step 5 – Repeat steps 2–4 for the remaining stations and programs.
Step 6 – Return the function dial to
Downloaded from www.Manualslib.com
to select the program being modified. Select from
PRG
or to select the Zone (station) number (1–6) being modified.
or to adjust the desired time duration (runtime) you want the station to
Hours Minutes
manuals search engine
0:00
.
RUN
when finished.
position.
A B C
, or .