Additional Information - Sony DVP-NS300 Service Manual

QQ
3 7 63 1515 0
xPAUSE MODE (DVD only)
Selects the picture in pause mode.
AUTO The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
FRAME The picture, including subjects
that do not move dynamically, is
output in high resolution.
xPARENTAL CONTROL t (DVD
only)
Sets a password and playback limitation level
for DVDs with playback limitation for
children. For details, see "Limiting playback
by children (Parental Control)" (page 47).
xTRACK SELECTION (DVD only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD on which multiple audio
formats (PCM, DTS or Dolby Digital format)
are recorded.
OFF No priority given.
AUTO
Priority given.
Notes
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 55).
• If you set "DTS" to "OFF" (page 59) set the DTS
sound track is not played even if you set "TRACK
SELECTION" to "AUTO."
• If PCM, DTS and Dolby Digital sound tracks have
the same number of channels, the player selects
PCM, DTS and Dolby Digital sound tracks in this
order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, or Dolby Digital,
format by selecting "AUTO."
TE
L 13942296513
58
D-PCM
Select this when the player is
connected to an audio
component lacking a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround (Pro
Logic) or not by making
adjustments to the
"DOWNMIX" item in "AUDIO
SETUP" (page 58).
DOLBY
Select this when the player is
DIGITA L connected to an audio
component with a built-in Dolby
Digital decoder.
If the player is connected to an
audio component lacking a built-
in Dolby Digital decoder, do not
set this. Otherwise, when you
play the Dolby Digital sound
track, a loud noise (or no sound)
will come out from the speakers,
affecting your ears or causing the
speakers to be damaged.
DTS
Selects if DTS signals are output via the
DIGITAL OUT (OPTICAL and COAXIAL)
jacks.
OFF Select this when the player is
connected to an audio component
lacking a built-in DTS decoder. Note,
however, that the DTS signals
contained in a CD are output even if
"OFF" is selected.
ON Select this when the player is
connected to an audio component
having a built-in DTS decoder.
If the player is connected to an audio
component lacking a built-in DTS
www decoder, do not set this. Otherwise,
when you play the DTS sound track, a
loud noise (or no sound) will come out
from the speakers, affecting your ears
or causing the speakers to be damaged .
.
60
http://www.xiaoyu163.com
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the
sound according to the playback and
connection conditions.
Select "AUDIO SETUP" in the Setup
Display. For details on using the display, see
"Using the Setup Display" (page 54).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
xAUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
OFF Turns off the audio attenuation.
Normally, select this position.
ON Reduces the audio output level so that
no sound distortion occurs.
Select this when the playback sound
from the speakers is distorte d.
xAUDIO DRC (Dynamic Range Control)
(DVD only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the AUDIO DRC function. This affects the
output from the following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— DIGITAL OUT (OPTICAL and
COAXIAL) jacks only when "DOLBY
DIGITAL" is set to "D-PCM" in
"DIGITAL OUT." (page 59)
Note
If you select one of the TVS settings while playing a
DVD, the player does not output Dolby Digital signals
from the DIGITAL OUT (COAXIAL and OPTICAL)
jacks (when you set "DOLBY DIGITAL" in "AUDIO
SETUP" to "D-PCM").
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
STANDARD
Normally, select this position
TV MODE Makes the low sounds clear
even if you turn the volume
down. It is especially
recommended when you listen
to the sound using the speakers
of the TV.
WIDE Gives you the feeling of being at
RANGE a live performance. When you
use high quality speakers, it is
even more effective.
xDOWNMIX (DVD only)
Switches the mixing down methods when
you play a DVD on which rear signal
components such as LS, RS, or S are
recorded in Dolby Digital format. For details
on the rear signal components, see
"Changing the Sound" (page 42). This
function affects the output of the following
jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— DIGITAL OUT (OPTICAL and
COAXIAL) jacks when "DOLBY
DIGITAL" is set to "D-PCM" in
"DIGITAL OUT" (page 59).
DOLBY Select this when the player is
SUR- connected to an audio component
ROUND
that conforms to Dolby Surround
(Pro Logic). The output signals
which reproduce the Dolby
Surround effect are downmixed to
2 channels.
NORMAL
Select this when the player is
connected to an audio component
that does not conform to Dolby
Surround (Pro Logic). All of the
output signals are downmixed to 2
channels without the Dolby
Surround (Pro Logic) effect.
Q Q
3 6 7 1 3

Additional Information

Troubleshooting
If you experience any of the following
difficulties while using the CD/DVD player,
use this troubleshooting guide to help remedy
the problem before requesting repairs.
Should any problem persist, consult your
nearest Sony dealer.
Power
The power is not turned on.
, Check that the AC power cord is connected
securely.
Picture
There is no picture.
, The connecting cords are not connected
securely.
, The connecting cords are damaged.
, The CD/DVD player is not connected to the
jack
correct TV input (page 17).
, The video input on the TV is not set so that you
can view pictures from the CD/DVD player.
Picture noise appears.
, The disc is dirty or flawed.
, If the picture output from your CD/DVD
player goes through your VCR to get to your
TV, the copy-protection signal applied to
some DVD programs could affect picture
quality. If you still experience problems even
when you connect your CD/DVD player
directly to your TV, please try connecting your
CD/DVD player to your TV's S video input
(page 17).
Even though you set the aspect ratio
.
in "TV TYPE" of "SCREEN SETUP,"
the picture does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
1-14
9 4 2 8
xDIGITAL OUT
Selects if audio signals are output via the
DIGITAL OUT (OPTICAL and COAXIAL)
jacks.
ON Normally, select this position. When
you select "ON," set "DOLBY
DIGITAL," and "DTS." For details on
setting these items, see "Setting the
digital output signal."
OFF
The player does not output the audio
signals via the DIGITAL OUT
(OPTICAL and COAXIAL) jacks. The
influence of the digital circuit upon the
analog circuit is minimal.
Setting the digital output sign al
Switches the method of outputting audio
signals when you connect the following
component using a digital cord via the
DIGITAL OUT (OPTICAL or COAXIAL)
jacks.
— Amplifier (receiver) with digital input
jack
— Amplifier (receiver) with a built-in DTS,
or DOLBY DIGITAL decoder
— MD or DAT deck
For connection details, see page 19.
Select "DOLBY DIGITAL," and "DTS"
after setting "DIGITAL OUT" to "ON."
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
xDOLBY DIGITAL
Selects the Dolby Digital signals output via
the DIGITAL OUT (OPTICAL and
COAXIAL) jacks.
1 5 0 5 8 2 9 9 4
continued
Sound
There is no sound.
, The connecting cord is not connected securely.
, The connecting cord is damaged.
, The CD/DVD player is connected to the
wrong input connector on the amplifier
(receiver) (21, 22, 23).
, The amplifier (receiver) input was not
changed so that you can listen to the CD/DVD
player.
, The CD/DVD player is in pause mode or in
Slow-motion play mode.
, The CD/DVD player is in fast forward or fast
reverse mode.
, If the audio signal does not come through the
DIGITAL OUT (OPTICAL and COAXIAL)
jacks
, check the audio settings (page 58).
Sound is noisy.
, The disc is dirty or flawed.
, When playing a CD with DTS sound tracks,
noise will come from the LINE OUT L/R
(AUDIO) 1/2 jacks (page 29).
Sound distortion occu
, Set "AUDIO ATT " in "AUDIO SETUP" to
"ON" (page 58).
Operation
The remote does not function.
, There are obstacles between the remote and
the CD/DVD player.
, The distance between the remote and the CD/
m
DVD player is too far.
, The remote is not pointed at the remote sensor
on the CD/DVD player.
co
, The batteries in the remote are weak .
continued
9 9
2 8 9 9
59
61